Manufacturing process of aluminum silicate fiber cotton

Aluminum silicate fiber cotton is made through a certain process to improve the tensile strength and anti rheumatism performance of fiber cotton. About the production process, Xiaobian sorted out its production process according to relevant data. Interested friends can learn about it:

Aluminum silicate fiber cotton can be produced by arc blowing fiber forming and wet felt making process. After forming strand, qualified matching raw materials are added to the electric arc furnace for melting. Then, the stream strand is blown by compressed air or steam to become fiber, and then after the slag is removed by the slag remover, the cotton is collected to form waste fiber. Then the waste fiber is sent to the stirring tank for vortex slag removal, and the slurry is formed after applying adhesive in the storage tank. The aluminum fiber is dried by vacuum suction or vacuum filtration press, and finally formed into aluminum fiber.

Among them, the fiber can be formed by resistance injection (or wire throwing) and dry needling blanket making process. The dry needling blanket making process is developed based on the non-woven needling process technology. When the loose fiber blank is sent to the needling machine for acupuncture, hook pins are put on the needles to make the fiber layers tightly intertwined with each other.

Through the understanding of the production process of aluminum silicate fiber cotton, I believe you have a further understanding of this product. What needs to be paid attention to is some details in the production process, which has made the finished product have a better effect.