Production Process:

Using high purity ceramic fiber cotton as raw material, our self-developed environment-friendly production equipment was used to form the inorganic board without secondary calcination.

Characteristics:

The new inorganic ceramic board contains very low organic matter. It is smokeless, tasteless.Strength and hardness can increase when exposed to open fire and high temperature.

With the use of new equipment, production technology and formula, the new inorganic ceramic board has more accurate size, more delicate and smooth surface, extremely low shot content, low thermal conductivity and small thermal shrinkage.

It can be cut into corresponding size according to the use requirements, and can be processed by drilling and cutting. It is an ideal environmental protection high temperature heat insulation board for wall hanging furnace, electric furnace and oven.

Product Application:

Thermal insulation and fire-retardant materials for metallurgy, petrochemical, glass, ceramics, non-ferrous metals and other industries

It is required that there is no smoke and no fire in high temperature or open fire

Specifieness:

--Thickness :5mm-200mm, one-time molding

--Very low organic content:< 1.45%

--No calcination, smokeless and tasteless at high temperature, no discoloration

--High strength, can do any carving

--No mildew, no waste water, environmental protection and energy saving

Five Significant Advantages

Thickness 5mm-200 mm, one-time molding:

The size of traditional organic fiber board is 10-60mm,too thin board has no strength and is fragile, too thick board is hard to dry, easy to moldy deformation, and easy to be of "cotton core".

Non calcined inorganic fiber board, with its high density and easy to dry characteristics, ensures the high quality of fiberboard, and makes it extremely thin and thick without deformation.

Very low organic content, < 1.45%

Traditional organic fiberboard, organic content 7-9%, easy to absorb moisture mildew, easy fire and smoke in high temperature.

The non calcined inorganic fiber board adopts high-quality inorganic glue to achieve extremely low organic content and avoid the problem of smoke and fire in the use of fiberboard.

No calcination, smokeless and tasteless at high temperature, no discoloration

If the traditional organic board wants to be smokeless and colorless at high temperature, it must be calcined twice and dipped again after finished. The organic content is still very high, and the internal strength of the fiberboard can not be guaranteed.

Because of its high-quality inorganic glue formula, the non calcined inorganic fiber board does not need to be calcined, so it is really smokeless, tasteless and colorless.

High strength, can do any carving

Due to the characteristics of silica sol binder, traditional organic board can't form high-density fiberboard at one time. It has to be dipped again after first finished, so the internal strength of fiberboard can't be guaranteed.

However, the non calcined inorganic fiber board can be formed at one time to achieve the density of 400 and above. The internal and external strength is the same, and can be carved into any desired shape at will.

No mildew, no waste water, environmental protection and energy saving

Traditional organic board production uses starch, which is easy to mildew; The waste water produced will inevitably pollute the environment.

Non calcined inorganic board production will not produce waste water, recycling, truly achieve energy conservation and environmental protection, to make a contribution to human progress.、

Technical Data